Convert RAW to NTFS CMD

Hi, have you ever encountered the problem wherein the file system of your Windows hard drive turned into RAW? If you have experienced this issue, then don’t be panic. This article will offer few effective methods to recover RAW partition and convert RAW partition into NTFS in Windows 10.

What is RAW file system?

Generally speaking, RAW refers to the file system that is not formatted with FAT or NTFS file system. RAW file system is a stage wherein the operating system fail to recognize the file system, due to which the files stored in the RAW partition will be lost. NTFS or FAT formatted partition usually turns into RAW due to severe virus infection on the drive, formation of excessive bad sectors on the drive, interruption while formatting, improper formatting, repartitioning, operating system reinstallation, partition table damage, MBR corruption, Etc. If your hard drive partition was formatted with FAT or NTFS file system before turning into RAW, then the files and folders store din that partition can’t be accessed anymore. Now, how to recover data from RAW partition, and how to convert RAW partition to NTFS? Continue reading further…

Recovering data from RAW partition: 

The easiest way of performing RAW file system recovery is by utilizing RAW Partition Recovery software on all Windows PCs. RAW Partition Recovery software recovers more than 300 types of files from RAW drive in few easy steps. The demo version of the software is available for free download, straightaway download, install and run the software on your computer to recover and preview the recovered file from RAW partition. After previewing the recovered files, if you are satisfied with the tool, activate the complete edition and save the recovered files at your desired location. Now, you have recovered all your files from RAW partition, but how to convert RAW partition back to NTFS now?

Converting RAW drive to NTFS: 

Download the free MiniTool Partition Wizard on your Windows PC, and then follow the steps mentioned below to convert the RAW partition to NTFS.

Step 1: Launch the installed MiniTool Partition Wizard on your computer, and go to its main interface. Then, right-click on your RAW partition to select “Partition Recovery” feature in Windows 7/8/10. You can even select the target disk and click “Partition Recovery” from “Check Disk” drop-down menu.

Step 2: Now, choose the scanning range. MiniTool Partition Wizard offers three scanning range settings.

  • Full Disk: This mode is suitable for scanning the entire disk.
  • Unallocated Space: It only scans the free space on your selected disk.
  • Specified Range: It scans the specified sectors.

Then, click on “Next” button to continue.

Step 3: Now, set the scanning method for the specified scanning range. “Quick Scan” and “Full Scan” are the two scanning methods. Between them, the former can restore lost/deleted partitions which are continuous and the latter is designed to scan each sector of the scanning range you have chosen.

Step 4: After the completion of scanning, all the partitions on your hard drive will be listed here and then please select the partitions you need.

Take the first partition as example. When double clicking on this partition, which is in RAW file system in Disk Management, and then all partition data will be displayed. Please check whether the files are your needs.

Step 5: Now, click “Finish” to go back to the main interface of MiniTool Partition Wizard. Here you can preview all the RAW partitions will be converted to NTFS. Finally, hit “Apply” button to perform RAW partition recovery operation in Windows 7/8/10.

Alternative solutions: Formatting the RAW partition in Disk Management, Formatting the RAW drive in Windows Explorer are the alternative solutions to convert RAW drive into NTFS.

Learn How to Run Windows 10 on Mac

In the Mac there is a unique key benefit that you can run Windows or OS X on the same computer. As you all know that Windows 10 is the latest version of Windows operating system. There availability of Windows 10 is ready and you can run OS X and Windows 10 on the same iMac, MacBook, Mac Pro or Mac mini.

macbook-leadIn this article let us learn about how to install Windows 10 and run your Mac using Boot Camp. One thing to keep in the mind is this is not the only method and there are many other methods.

How to run Windows 10 on Mac: Boot Camp or virtual machine?

There are two ways to get windows 10 on your iMac, Mac mini, MacBook or Mac Pro. On hard drive’s partition you can install Windows using the built-in Boot Camp. Your OS X device can be booted directly into Windows 10, and it will look and work like Windows PC, even though it is still OS X.

As a virtual machine there are two options to run inside an OS X program. From Oracle the Virtual Box can be used for free or for the cost of £64.95 the even more popular Parallels Desktop or VM Ware Fusion can be used. On a Virtual Machine you would run Windows, in this article you will get to know how.

How to run Windows 10 on Mac?

The advantage is the entire recent Mac devices are able to run the Windows 10. First of all you need to take the back up of your Mac. To download Windows 10 it is easier on a PC, the main thing is we need to thank Windows 10 app. In order to run a copy on your Mac, there is trickier.

  1. First of all you need to download the Windows 10 Disc Image.
  2. Then you need to choose 64-bit download.
  3. You will get a link and it will be valid for 24 hours.
  4. The download of installation file will be done into your Download folder.
  5. Now follow the recommended steps to install the Windows 10 and enjoy it.

What’s the Difference Between M.2 Modules?

Nowadays we are connecting high speed modules to a motherboard using the M.2 which become trend. This space is now dominated by flash memory M.2 cards of various capacities, speeds and interfaces as it can handle various devices like wireless adapters. The latter is a primary differentiation between modules as the interface which is used. These include SATA 3.0, PCIe (PCI Express 3.0) and USB 2.0 or 3.0 with the help of HSIC and SSIC support. it also provides other interfaces which include audio, UIM, I2C, SMBus, etc.0215Trends-Memory-Fig-1

The M.2 a module are 22 mm wide and comes in a no. of lengths such as 30, 42, 60, 80 and 110 mm. Motherboards are generally handle different length M.2 modules however 80 mm is the typical size for a flash memory module. Wireless adapters are frequently found on shorter modules. A motherboard doesn’t support all lengths.

A motherboard can fit in a range of key M.2 socket options. The trendiest are B and M. The B interface offers SATA, x2 PCIe, HSIC, SSIC, I2C, USB 2.0/ 3.0, audio, UIM and SMBus support. The M interface give x4 PCIe, SATA, and SMBus. The sockets are keyed thus a module cannot be plugged into a socket which doesn’t support the module’s interface. M.2 modules are keyed to fit sockets which will support the interface used by the means of the module.0215Trends-Memory-Fig-2

SATA modules like SanDisk’s X400 generally have a B and M edge connector which allows them to plug into a B or M socket. The 80 mm long X400 cling up to 1 TB of flash memory. It is a single side M.2 module which is only 1.5 mm high. The 256 GB version is rated at 40 GB/day for 5 years. It employs SanDisk’s 6th generation X3 Technology. M.2 modules with a x4 PCIe interface must have a M connector.

The main differences between the x4 PCIe or NVMe interface and the SATA interface are bandwidth and overhead. A single PCIe 3.0 path can handle a 6 Gbit/s SATA 3.0 interface. There is also less transparency with a direct PCIe interface.0215Trends-Memory-Fig-3

Device drivers usually insulate applications from the underlying hardware which allows designers to decide the appropriate hardware for the app and processor balancing performance, capacity and the cost. One or more M.2 sockets can be establishing new motherboards. An M.2 module can be the primary storage device eliminating the requirement for more conventional hard disk or SSD drives.

How to view saved Wi-Fi passwords in Windows 10, Android and iOS?

Nowadays Wi-Fi is one of the most used features for internet Connection. Many coffee shops, stores, hotels, pubs, service stations, etc offer free Wi-Fi. At times your acquaintance punches in a Wi-Fi password in his/her house for your short-term browsing. Most of the users have numerous networks in their mobiles that why is it doesn’t mean that they will remember the entire network password. That’s why you want to know the Wi-Fi password for currently connected/ past connected network. So, how you will get the passwords that is saved on your system/phone to use it. Just follow some simple steps through which you will easily get the saved password on your Windows 10 system.wifi_security

For Windows 10, 8, 7 and 8.1

  • On the Windows System, right click on the Wi-Fi icon and then choose Open the network and Sharing.
  • Once the Network and Sharing Center opens up then it will show all the list of network that are connected to your computer currently. Click on Connections and it will open the Wi-Fi Status Window on your system screen.
  • Choose Wireless Properties in the Wi-Fi Status window and Wireless Network Property of the connected network. This page will show you the connection name as well as type of connection and will show you a Security tab on which you have to select it.
  • The Network Security Key option will have the Wi-Fi password and you can check this option to Show characters to make the password visible.8bfcc_show_password

If you are using an Android smartphone or a tablet, firstly you have to install free file browser ES Fie Explorer in smartphones or tablets for finding out the password of a Wi-Fi network.

  • Open a ES File Explorer in your smartphones or tablets
  • Go to the data/misc/Wi-Fi folder in C: on your device
  • Open the file called wpa­_supplicant.conf then you will see the list of all saved Wi-Fi networks with their passwords.

To get back a Wi-Fi password on a jailbroken iPhone, you can check in a Keychain entrance application if you have a Mac connected system to a same network.

  • You can download the Wi-Fi Passwords App from Cydia.
  • Open the Application then you will get the list of all the passwords on your iPhone that are saved on it.

Few Windows 10 Privacy Settings That Are Falsely Criticized

In today’s world, most computer users are using Windows operating system in their computer system because of its graphical user interface is very easy to understand the features of the Windows OS. The users have been receiving regularly the newest version Windows 10 free up-gradation notification in their system. Recently news occurs on the internet that Microsoft Windows 10 violating the user privacy by default. But, the truth is somewhat different.

Few Windows 10 Privacy Settings That Are Falsely CriticizedThe default privacy setting of the Windows 10 operating system does not allow Microsoft to access to the intimate and secrete information. Actually, Microsoft collects most of the information from Windows 10 OS is same as Google, Facebook, Apple, and more gather user information for utilizing their services.

Here are a few Windows 10 privacy settings that are falsely criticized:

  • In General tab, the setting founds in Windows 10 privacy configuration is all have to do with personalizing advertisements. It creates an ID for advertising which is unique to the particular user and keeps secrete to the third party advertiser. With the help of that ID, the advertiser can use algorithm to make out which advertisement user are interested in and nobody can access those information, just an algorithm.
  • Location privacy setting of Windows 10 PC mainly anxiety about how user’s mobile phones operates. It is common to all mobile phone devices that are using IOS or Windows or Android operating system. With this setting, user can use GPS from their smart phones for location.
  • The feedback and diagnostic setting in the Windows 10 OS is used for, Microsoft simply wants to know how user use Windows 10 in their PC, which apps is most often used by user and which apps is never or rarely used and which application can cause system crash. From these feed backs, Microsoft can decide where to make improvements and where to limit the excess. With this information, Microsoft comes with new features and better improvements for the next time.
  • Cortana is closely associated with the mobile phones, but user can access it from the desktop also. Cortana option must be turned on in the device, before its start learning about the user how they interact or use the Windows 10 PC, then its start listening and watching. If you don’t want to use Cortana, just leave the setting in the off position.

Disable Automatic Updates on Android Phone

It is user convenient to have their phone installing updates of apps automatically as they are notified in the android phone. But, there is good reason behind to stop automatic updates in android phone. User might want to save the usage of internet data or they simple want to have control over their Android device which application to get installed. Majority of user doesn’t know that they can have control over the updates of apps and they seek or ask their friends how to stop automatic updates in android phone?how to stop automatic updates in android phone

Nowadays, Android phones are the most popular all over the world and it is widely used by most of the users. Is powerful and built with high technology smart phone which runs on Google’s Android operating system in it. Android phone is designed in such a way that it fulfills the user’s desires like amazing wallpapers, themes and launchers which makes phone looks better. Because of its user friendly interface lots of people opt this device. There are many apps has been developed which supports android operating system phone. User will get regular updates for the apps that add great new features to smart phone.

Don’t need to worry! Because, there is good news for them i.e. they can disabled automatic updates on their Android mobile phones. Her, in this page I am going show you the procedure for how to stop automatic updates in android phone easily without any trouble.

Turn off automatic app updates in Android phone:

  • Start the process by opening the Google Play Store app in your Android phone. Next, touch slide out menu option in the upper left corner, as it is denoted by three horizontal lines, then click on settings. On the settings screen, choosing Autoupdate apps.
  • On the next screen, there will three options to choose auto updates apps at any time data changers may apply or Do not auto updates apps or whether you want to allow apps to automatically receive updates when you are connected to internet through Wi-Fi.
  • Click on Do not auto updates apps option then you can manually install all updates. For the sake of this how-to, we want to turn off auto-updates altogether, so go ahead and tap “Do not auto-update apps.”

After this, the Auto-update apps option screen will get close; bring back to the main Google Play Store settings screen. Tap your Android phone back button to return to the Play Store’s home screen.